thesharkfactor 0 Posted April 17, 2010 Report Share Posted April 17, 2010 hi guys,looking for some advice.. ive fitted a set of audi tt competition alloys on my mk3 vr6.. they fit fine and look great- but.. the centre caps will not fit on the rear wheels as the hub in the very centre sticks out slightly. there is a domed cap on the very end of the hub, preventing the centre cap fitting in place.. can this cap be removed? or will there just be a big nut/bolt behind it? i dont want to hammer it off only to still have the same problem..ive seen many others with these wheels on a mk3 golf centre caps and all!.. so they must go on somehow?thanks for any advice... Link to post Share on other sites
Mark_H 0 Posted April 17, 2010 Report Share Posted April 17, 2010 Hi,That cap is a dust shield for the wheel bearings. Some people flatten the cap to fit the centre caps or get some spacers for the rear wheels. Link to post Share on other sites
Lukey. 381 Posted April 17, 2010 Report Share Posted April 17, 2010 as long as it still makes a good fit just flatten it Link to post Share on other sites
Recommended Posts