engine timing.

[juliet 0]

Right all you tecnobuffs, Iv recently had my rocker cover off, distributer off etc, this was for another problem, the problem now is how do i time my vr. Iv had all the leads off the dizzy and what to know which is cylinder 1 so i can set up the leads, and yes im gormless for not marking it all up in the first place. Is there a section i can go to on here that will let me know how to do it / work it out or does someone know of a web site that might let me know.

Thanks

Homer

[thegoth 5]

i did once upload pics of the ht leads on a dizzy block. Also do you have the plastic lead guides on the engine? The lead slots are numbered. As are the connectors on the dizzy cap cover.

[juliet 0]

Brilliant that person, why didnt i think of that, iv only one small problem, i cant fing the plastic cover that goes over the dizzy cap. Is there any one out there who would be willing to photograph there dizzy with plastic cover on and send it to me. Iv moved house since the car decided to stop working and the plastic cover could be anywhere, iv spent the last 20 mins looking and its not in my usual bits department.

Thanks Homer

bhobson15 at gmail.com

[thegoth 5]

i've bumped the picture thread for you