S600B_DC 0 Posted March 16, 2010 Report Share Posted March 16, 2010 Hi everyone I am looking for some help and advice.I am now looking to improving the handling of the 4mo. I really need to get rid of the wallowy ride, now a lot of people have gone for the R32 rear ARB and related bushes and droplinks. This could be a route, but I am also thinking along the lines of uprated dampers and springs. Was looking at coilovers but I am not going to be adjusting it myself so think this may be overkill, also I do not want to lower it severely, I have 18"s on it now and don't want to get into the rolling arches situation, so thinking 30mm drop maximum.So really looking for some suggestions and advice and best placed to buy from.Thanks in advanceDavid Link to post Share on other sites
warby 0 Posted March 16, 2010 Report Share Posted March 16, 2010 You could do the full r32 setup, shocks springs, bushes arb's etc and would sit nicely on your 18s, but even used r32 shcoks will be more than coilies.Nice set of coilies (dont want to lower it more than 30mm as it has been suggested it plays havoc with the Haldex)Polybushes etcARB'sShould be a nice tight ride then, might want to look into adjustable bushes or adjustable rear tie bars to sort out the rear camber too.My standard 4mo scrubs slightly with 18's going into full lock at times though.Hope this helps otherwise someone more in the know will help you out:) Link to post Share on other sites
bungy 2 Posted March 19, 2010 Report Share Posted March 19, 2010 Fit a nice set of AP's with the rear adjusters removed to get the ride height right. Link to post Share on other sites
Recommended Posts