theblueflash 0 Posted March 5, 2010 Report Share Posted March 5, 2010 hi. ive got a problem. hope somepne can help. got a golf which ive had a few weeks and its on its arse on coilovers. i need to get it to the bodyshop tomorrow to get the arches looked at but the car is far too low. ive raised the front easily enough but the rears are a pain in the backside.i cant get the height adjustment ring to move unless i use a large screwdriver and a club hammer!!!there are two rings on the thread. the smaller of the two on the bottom, the coilover key fits but the larger one on top doesnt want to spin with it. is that threaded also? or is it just a little siezed? surely you dont need two keys for this, i didnt on the front. any help appreciated as im rapidly running out of wd40!!! Link to post Share on other sites
Dazdub 0 Posted March 5, 2010 Report Share Posted March 5, 2010 What make are they fella Link to post Share on other sites
vr6stormt 0 Posted March 5, 2010 Report Share Posted March 5, 2010 you might need to just get a set of grips on the top and the c spanner on the bottom one to spin them apart Link to post Share on other sites
theblueflash 0 Posted March 5, 2010 Author Report Share Posted March 5, 2010 no idea. possibly cheap ones! cleaned the thread with some wd40 and an air line. the top ring was siezed and the crap on the threads wasnt helping. sorted it now. thanks for the quick replies. good to know ive got support if i choose to be sad staying in and playing with my cars on a friday night!!!!! 8-| Link to post Share on other sites
Recommended Posts