Jump to content

Recommended Posts

I have picked up a VR6 engine for a conversion, and whilst taking it apart i noticed that there is a hole in the rocker cover at the throttle body end, that looks like something has snapped from it and left a hole.

IMG_0123.jpg

What should be fixed here? Would it be the pipe with a filter type object that comes of the induction pipe between the TB and the Airflow meter?

Cheers

Link to post
Share on other sites

Ahh, yours is an OBD2 by the looks of the throttle body.

Mine is an obd1 coilpack, change over jobbie, but it helps.

On the center and the right of your pic there is a pipe with nothing fixed to it that comes from the engine cover. This is broken off mine, What goes onto there?

Link to post
Share on other sites

Ah ha!

Cheers, thanks a lot.

I suspected that must go somewhere, at present it just hangs from the induction pipe between the throttle body and air meter. But alas it looks like my rocker cover is buggered and i need a new one :(

Cheers for the help.

If you ever lift your engine with straps on the hooks, be careful not to snap yours. lol

Link to post
Share on other sites
×
×
  • Create New...