jmh2jmh2 0 Posted July 29, 2009 Report Share Posted July 29, 2009 Hi AllI have a VR6 , a 1992 with distributorCar completely cut out this morning when driving along ; has been getting a little bit temperamental about starting for a few days if im honestHad the AA out and hoping they would hook up to the OBD1? connector (2 wires) and read me off what the prob was (ha!ha!)They tell me there is power at the coil but no signalling coming to send it out, also no power at the injectors or fuel pump . Fuses and all ignition lights are ok. They seemed to think a prob with power to the fuel pump relay (which is the only one they could think of)My questions are1) In which order do the above sit i.e. which not working causes the other ones not to get power (or is there something upsteam which all of them have a dependancy on) . I have an old immobiliser unused but figure (and if i recall) ignition lights didnt come on when this was triggered before2) Will the diagnostic plug of such an old model actually give much info re any of the sensors anywaythanks for help in advance Link to post Share on other sites
Recommended Posts