boaby82 0 Posted March 26, 2009 Report Share Posted March 26, 2009 i want to fit upgraded cams to my vr6, does anyone knw the best ones to get and has anyone done it themselves;don't want to spend a fortune fitting them if i can do it myself! Link to post Share on other sites
craggsy 91 Posted March 26, 2009 Report Share Posted March 26, 2009 depends if you wanna stay NA or go with turbo/super charger later Link to post Share on other sites
Ben Seabrook 4 Posted March 26, 2009 Report Share Posted March 26, 2009 Hello mate moved your thread to the tuning forum as you will get more replies here if you are running normally aspirated then I think 268's are the best ones to go for - as for fitting depends on how good a mechanic you are ? am sure someone will be along to tell you but I believe it is quite a tricky job Link to post Share on other sites
Dave Lea 4 Posted March 26, 2009 Report Share Posted March 26, 2009 its not to hard but when i started mine i found the chains and guids had had it so was a mucth bigger job then if they are ok then time the engine up and off u go Link to post Share on other sites
boaby82 0 Posted March 27, 2009 Author Report Share Posted March 27, 2009 thanks for the advice and thanks for moving the post. i've done plenty of work on engines and i used to work as a mechanic so should be ok then? i dont really want to spend loadsa doh so think forced induction is out of the question. i'm only looking for around the 200bhp mark i wont need turbo/supercharger for that will i? Link to post Share on other sites
Recommended Posts