VRPETE6 0 Posted March 10, 2009 Report Share Posted March 10, 2009 Picked up as advisory on Mot will need replacing soon though they are the big ones 1 either side of rear frame.. looks a big job if i have to drop it all down as rear shocks etc will have to be unbolted..Any advice..>>??ThanksPete Link to post Share on other sites
craggsy 91 Posted March 10, 2009 Report Share Posted March 10, 2009 Rear shocks is not a big problem matey. making sure the rear axle goes back straight is more important Link to post Share on other sites
VR6_Absy 0 Posted March 10, 2009 Report Share Posted March 10, 2009 bushes can be a b1tch to get out, just hacksaw them out and replace with poly bushes.Removing the brake bias is another b1tch, be worth investigating how much a replacement is and get one just in case. I drilled the bolts out of mine but have been told its easier to remove brake pipes and then just cut the old one off Link to post Share on other sites
VRPETE6 0 Posted March 10, 2009 Author Report Share Posted March 10, 2009 Are they presseed in..??? as havent had chance to look yet..???If they are guess rear frame has to come off to sort out then..??Pete Link to post Share on other sites
VR6_Absy 0 Posted March 12, 2009 Report Share Posted March 12, 2009 Are they presseed in..??? as havent had chance to look yet..???If they are guess rear frame has to come off to sort out then..??PeteNoCut the originals out, clean up the bore, coppercoat poly bushes and push in by hand ;-) Link to post Share on other sites
Recommended Posts