vr6power 1 Posted February 28, 2009 Report Share Posted February 28, 2009 does anyone have a pic of the 6 injectors showing what plug goes on what injector or does anyone know what colour goes wherecheers Link to post Share on other sites
krave 0 Posted February 28, 2009 Report Share Posted February 28, 2009 i thought the plugs where numbered for each injector?? Link to post Share on other sites
vr6power 1 Posted February 28, 2009 Author Report Share Posted February 28, 2009 yea they are but i took them all off 2 change i think they are on right but just need 2 check.the prob is my engine turns over but does not start it just bangs once or twice and i have checked the timming and that is spot on you got any ideas chap Link to post Share on other sites
krave 0 Posted February 28, 2009 Report Share Posted February 28, 2009 i mean are there not numbers on the actual connector (at the end of the wire which then plugs onto the injector)surely you only changed injectors, you didnt remove the connectors from the wires??I may be wrong and the numbers are on the plastic runner, but i do think they where on the connectors themselfs.sorry if im wrong and not being helpfull at all. Link to post Share on other sites
vr6power 1 Posted March 1, 2009 Author Report Share Posted March 1, 2009 ok cool thanks alot bud il have a look tomorrow thanks for the advice Link to post Share on other sites
UnitedMotorsport 55 Posted March 1, 2009 Report Share Posted March 1, 2009 The following wire colors can be found on pin 2 of each injector plug.OBD1/2:injector1: Greyinjector2: Grey/Greeninjector3: Grey/Redinjector4: Grey/Blueinjector5: Grey/Blackinjector6: Grey/yellow Link to post Share on other sites
vr6power 1 Posted March 1, 2009 Author Report Share Posted March 1, 2009 cool thanks alot just what i need Link to post Share on other sites
Recommended Posts