golfgirlvr6 0 Posted December 9, 2008 Report Share Posted December 9, 2008 Has anyone got a picture of what the rear brake pressure regulator looks like on a normal ride hight mk3 vr6 golf!!?? As the car we've acquired has been lowered and the above has not been adjusted which makes braking a very eventful action!!! Please help as this needs adjusting asap so it brakes at the front again!!!!! Many Thanks Link to post Share on other sites
Phat VR6 3 Posted December 9, 2008 Report Share Posted December 9, 2008 obd2s don't have them... well mine didn't! ABS take away the need for oneMy load sencing valve is about 2mm from the very top which is mostly braking at the front. (ive removed abs)Stops the back end locking first and stepping out altho id like alittle more going to the back Unfortunately its a case of jack it up, adjust drive, jack up again till you got it spot on but 2 mm from that top will be a good starting point Guessing your abs isn't working? Link to post Share on other sites
golfgirlvr6 0 Posted December 9, 2008 Author Report Share Posted December 9, 2008 No, abs is working, it just dont nose dive when you brake hard!! It squats instead!! I was hoping i wouldn't have to jack the back up drive etc but i'll go for the 2mm gap and give it a go!! Thanks for your help!! It's an L reg aswell so not far from mk2 production if you think about it!! Link to post Share on other sites
Recommended Posts