vrclaire 0 Posted November 13, 2008 Report Share Posted November 13, 2008 Hi.......Im on standard shocks with 40mm lowered springs, but the rear wheel o/s is catching the arch occasionally. My wheels are 205/40/17...any Ideas on what i should change to so Im not catching the wheel arch....any help would be appreciated...claire. Link to post Share on other sites
nmackenzie 0 Posted November 13, 2008 Report Share Posted November 13, 2008 i would get the arches rolled thar should solve ur problem Link to post Share on other sites
Phat VR6 3 Posted November 13, 2008 Report Share Posted November 13, 2008 Take the clip off the top inside of the bumper, then trim it back abit, Thats normally where they rub, If that doesn't sort it get as many of your mates you can to get in the back and boot and have a look where its rubbing, Might just be a case if fileing somthink a few mm or giving it a tap with a hammer, touch up paint after to stop rust Link to post Share on other sites
vrclaire 0 Posted November 13, 2008 Author Report Share Posted November 13, 2008 Thanks Guys will try this.... Link to post Share on other sites
Recommended Posts