jimredmk2 0 Posted September 17, 2008 Report Share Posted September 17, 2008 ok so i noticed my car lacking in power when it hits the usual wheel spinning shannanigan rev range of 4-6 grand, it doesnt do it when cold only when warm and if i unplug the maf then drive the power band comes back, my questions are- does the ecu put a nominal value in for the maf when unplugged, and it has no wire mesh in it could that be making a difference, i have tried cleaning it with brake cleaner to no avail, also a bit of topic but what is the little valve type thing with a plug connection on it do, which is in the oil breather from the rocker cover to the intake pipe? thanks in advance jim. Link to post Share on other sites
xyber 1 Posted September 17, 2008 Report Share Posted September 17, 2008 if the mesh has been removed that will cause problems, just get a new onethe connection on the breather valve does nothing on mine as the male end is a dummy Link to post Share on other sites
Recommended Posts