b4zza 0 Posted July 18, 2008 Report Share Posted July 18, 2008 hi there got a new stat from euro the other day and they sent me a 87 deg stat when i took mine out it was a 80 deg i went ahead and put it in the first prob i had was the top rad pipe blew off put a jubilee on it it was sorted but the car runs at 100deg so i have bought al the new housings and stat that is a 80 deg am just wondering if anyone knows if its the stat that would cause this as the one i took out is a walbro 80deg but the car ran cold as if there wasnt one in it Link to post Share on other sites
xyber 1 Posted July 19, 2008 Report Share Posted July 19, 2008 stick with the 80deg one matedont forget the hotter the water, the more pressure will build up as it expands, proper g12+ will help aswell Link to post Share on other sites
b4zza 0 Posted July 19, 2008 Author Report Share Posted July 19, 2008 whats g12+ Link to post Share on other sites
craggsy 91 Posted July 19, 2008 Report Share Posted July 19, 2008 coolant Link to post Share on other sites
craggsy 91 Posted July 19, 2008 Report Share Posted July 19, 2008 3 bottles needed for a complete refill Link to post Share on other sites
b4zza 0 Posted July 19, 2008 Author Report Share Posted July 19, 2008 what 3lt Link to post Share on other sites
craggsy 91 Posted July 19, 2008 Report Share Posted July 19, 2008 G12+ comes in 1.5ltr bottles so technically another 1/2 litre Link to post Share on other sites
b4zza 0 Posted July 19, 2008 Author Report Share Posted July 19, 2008 cool where do i grt it that is the stat in now along with the housings going to run it untill next weekend see how it goes from there then al flush it and get a full service as long as everything is ok thanks lads Link to post Share on other sites
Recommended Posts