toofunkyhouse 0 Posted March 11, 2008 Report Share Posted March 11, 2008 hi all, well today i took off my throttle body all pipe and maf to clean them out (didnt reall clean the maf as it looked ok. i also used my dremel to smooth out the throttle body a bit, put it all back on but now the car idles at about 1700 rpm it will drop in the end to about 1100 but as soon as you bilp the throttle it goes back to about 1900 then kind of hunts about, any ideas??why do i mess with cars!! grrr Link to post Share on other sites
craggsy 91 Posted March 11, 2008 Report Share Posted March 11, 2008 Dont know about you problem but can you please alter you r sig pic to fit in with the guidelines please. MAx size for sigs are 500x150 Link to post Share on other sites
Roan 0 Posted March 11, 2008 Report Share Posted March 11, 2008 You need to perform the throttle body alignment in vag-com, instructions here:http://www.ross-tech.com/vag-com/cars/throttlebody.htmlTry disconnecting the battery for an hour first though. Bear in mind though that if you've done too much dremeling, the TB will be fooked forever (speaking from experience here!!) Link to post Share on other sites
toofunkyhouse 0 Posted March 11, 2008 Author Report Share Posted March 11, 2008 cheers for that, but read through a few threads and found something about resetting the throttel body. i took the neg lead off the battery and reconnected it and then tunrned the key to the first postion then started her, seem to be fine now, cant say that its got anymore power but seems to be getting better mpg round town which will do me. yeah will change sig when i get time Link to post Share on other sites
Recommended Posts