SteveoVR6 0 Posted March 1, 2008 Report Share Posted March 1, 2008 right then, i took my throttle body off as my car wasnt ticking over quite right, kept going from 800rpm-650rpm. when i took my throttle body off here is what i found:[img width=600]http://i17.photobucket.com/albums/b99/gixer_steve/MuckyThrottleBody2.jpgso i cleaned it all out and got it looking nice and shiny again and re-fitted it back to the car:[img width=600]http://i17.photobucket.com/albums/b99/gixer_steve/Cleanthrottlebody.jpgwhen i was about to put the breather hose back on i noticed what can only be described as a scramble of wire in there:[img width=600]http://i17.photobucket.com/albums/b99/gixer_steve/Wirething.jpgAnd close up:[img width=600]http://i17.photobucket.com/albums/b99/gixer_steve/Wirething2.jpgso i took it out and now im wndering if its gonna spit oil back into the intake and round into the throttle body again? could i just fit one of the piperX breather filters?any help would be much aprechiated Link to post Share on other sites
craggsy 91 Posted March 1, 2008 Report Share Posted March 1, 2008 That wire mess should be there.......traps things in it stops them getting thro either way Link to post Share on other sites
SteveoVR6 0 Posted March 1, 2008 Author Report Share Posted March 1, 2008 ok just been and put the wire mess back in, thanx for the reply. is it clipped in place or is it just pushed into the outlet?thanx again Link to post Share on other sites
craggsy 91 Posted March 1, 2008 Report Share Posted March 1, 2008 Not 100% sure on that Link to post Share on other sites
D16vGTi 1 Posted March 3, 2008 Report Share Posted March 3, 2008 I'd be interested in knowing about fitting a breather filter as well as my return valve is knacked!! any more info guys much appreciated Link to post Share on other sites
Recommended Posts