amazak 3 Posted July 11, 2007 Report Share Posted July 11, 2007 Hello All,My car has an airbag fault, a diagnostic tool reported that it was driver side N-95. I have since bought a new driver airbag and fitted it but the light still stayed on. Can anyone suggest what else may need looking at? I read on another forum that there might be a 'clock spring' or something like that ...anyone know where to find these thingies? or even a manual/diagram describing the airbag system on a mk3 will help. At a total loss.Thanks Link to post Share on other sites
craggsy 91 Posted July 11, 2007 Report Share Posted July 11, 2007 has the fault code been cleared? Link to post Share on other sites
amazak 3 Posted July 11, 2007 Author Report Share Posted July 11, 2007 Do you mean after fitting the replacement, if so then the answer is no. Only fitted the replacement and expected the light to go off, I guess I am a total idiot huh? Link to post Share on other sites
craggsy 91 Posted July 11, 2007 Report Share Posted July 11, 2007 ECU will still have the fault stored.....so try clearing it, should make light go off Link to post Share on other sites
Recommended Posts