nig 0 Posted July 5, 2007 Report Share Posted July 5, 2007 i am thinking about getting a six branch manifold and de-cat dipe, is it worth it and which you recomend. any advice you could give would be great .......cheers! Link to post Share on other sites
matth76 1 Posted July 5, 2007 Report Share Posted July 5, 2007 I personally wouldn't recommend a stainless 6 branch - mainly due to them being very prone to getting small blows. Mine did and I took all the precautions to prevent it..just bad luck. Didn't make any real difference in power but did set me back quite a few bob! However a decat is worth getting or a high flow cat .. should liberate around 5bhp if you also fit a good air filter. However I'd spend my money on a set of 268 cams followed by remap...10-15bhp. Link to post Share on other sites
Recommended Posts