Flylow
-
Content Count
40 -
Joined
-
Last visited
Content Type
VR6OC News
Website Content
Profiles
Forums
Calendar
Gallery
Store
Collections
Community Map
Posts posted by Flylow
-
-
I've seen them on eBay
-
How about the injectors. Maybe they need a service to get them spraying correctly.
-
OK cool. I want to refresh the head and install high rev springs and retainers. That's quite costly where I live.
-
Is that a 2.8 24v vet engine?
-
What about offsetting the pin bush on the rods. That can give you about 1.5mm extra deck height.
-
I know it wont be a full 3.2 but going from 81mm to an 84mm bore will gain quite a bit of capacity gained.
Yep but the pistons won't reach the deck height because the pistons are shorter from pin to crown. Check that out 1st. The R32 crank stroke is longer and the rods are the same length for both engines therefore the crown height on the pistons should be shorter on the R32. So if you use a 2.8 crank the pistons won't reach they deck height. It would have low comp. Maybe you can turbocharge then. -
The R32 crank has a longer stroke. So you need that to complete the bottom end or get longer rods but then it won't be 3.2
-
Can you guys post a pic on this plug. I want to service the Haldex on my G4 4mo as well.
-
Hi was that a golf 2 g60?
-
Your car looks very nice. I wish I was in Europe to modify my vr6 4motion. I am battling to get mine turbocharged.
-
-
Hi peeps,
I want to buy a short runner intake for a 24v vr6. I don't mind second hand.
I'm in South Africa BTW.
Thx,
Bruce
-
Sounds like you need a BOV (blow off valve)? Have you got one fitted? What boost is this producing, I notice a cheeky intercooler
I also think a bov would help. With out a bov turbo impellers also suffer. Also check the profile of the new pulley's teeth. -
advise vr6t 4motion gearbox
in Transmission
Posted
Hi motorrob are you running boost and are you tracking the car or just Street use?