Jump to content

chippy

Members
  • Content Count

    79
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by chippy

  1. Hi Guys I've had this issue for some time now, and decided to tackle the issue whilst in lockdown. I ordered some silicone pipes and joiners to refresh the coolant pipes for my VR. As I have MK4 V5 gearbox in my MK2 this has caused a bit of a headache with regards to coolant pipes. First off, i had to run the MK4 Thermostat housing which caused problems using MK3 VR6 or Corrado VR6 radiator pipes. The lower radiator pipe to the thermostat housing was making contact with the shifter tower on the gearbox, so some hacking/bodging was required there. The top radiator pi
  2. Yes. Stealth are very busy with no availability until end of next month! Sot it may be Storm developments if they can get me in sooner. But I'd like to hear peoples past experiences using Storm for remaps And will it be ok to drive the car in the mean time as I've installed 263 SP cams?
  3. Hello I'm looking to get my vr6 remapped, got all the mods done to my car. I know Stealth are the go to people for VR6 tuning. But its a bit far out for me So I was considering Storm Developments as they're a lot closer to me So Storm or Stealth or either!? Cheers
  4. chippy

    Fuel lines

    Hard lines mate. That run underneath the car
  5. chippy

    Fuel lines

    As the title states after fuel lines. Can collect if local to Berkshire area
  6. How much for the fuel lines? Thanks
  7. Cheers dude. First time i've embarked on a project like this! So progress is fairly slow, learning as i go along.
  8. So after returning back from holiday. The day after i got stuck in. Started by tidying up the loom, wrapping the engine loom in conduit and the interior loom in tesa tape. Also completed the mk3 golf stalk swap I modified the dash to make the mk3 clocks fit, dont have any pics of this. But it was long and frustating task! Focuses my attention back to the engine bay, the servo and master cylinder where lookig rough. Didnt compliment the fresh looking engine. I removed em, gave them a lick of paint More updates soon.
  9. UPDATE So i have been getting back stuck into this build again. Managed to get hold of pair of power steering pipes, which took me almost a month to get hold of! Not exactly rare parts either. But thanks to another forum member on here, i got one Gave em a clean, sand and degrease. Then i coated them in underseal, not a show stopping finish but its presentable, durable and hopefully wont rust!
  10. I have the front grill and front lights mate. PM me
  11. http://www.ebay.co.uk/itm/262504953260?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
  12. http://www.ebay.co.uk/itm/262504948171?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
  13. http://www.ebay.co.uk/itm/VW-Golf-3-VR6-Dashboard-/262504957418?hash=item3d1e83c5ea:g:eskAAOSwEjFXdRT0
  14. I have just the fuel tank (no pump) if your interested mate. based in slough so not too far from you
  15. Yes mate, at your expense and if you could arrange it. cheers
  16. BUMP. Still after these, having a lot of trouble getting hold of them! Mostly due to timewasters Im also in need of the wiring for the fuel tank
  17. chippy

    Fuel pump wiring

    Thanks for the response guys Fairly straight forward, getting the tank straps on where a pain. Also, lining up the fuel tank neck to fit nicely behind the fuel filler cap.
  18. Again, NA tuning is expensive, spent close to £1000 completely reconditioning the head, new cams, valves, seals etc Few things you could to change the "feel" though In the states the use MK4 12v VR6 head gasket as appose to the MK3 one, slight increase in gains and increased compression Also a lightened flywheel will change how it will drive along with MK4 V5 gearbox.
  19. Currently sorting out the wiring in my mk2 vr6. Im using the mk3 VR6 fuel tank, however the plug off the loom doesn't fit the vr6 fuel pump Although both are four pins, u can see the grooves on the plug doesnt match on the fuel pump. Have i missed something here or does anyone have the plug i need? Thanks
  20. In excellent condition. Location: Slough Price: £20 collected OR £25 posted
  21. Was going to be used in my mk2 vr6, taking a different route so longer needed. In very good condition. Location: Slough Price: £60 Collected Can post but this is at buyers expense
  22. So my friend made a start on the wiring this weekend gone. Had a lil problem decided which fan set up to use, as i have golf vr6 wiring put corrado fans. In the end decided to go for twin spal fans an 11" and a 9" wired to a switch. They'll look better, neater and probs cool more efficently
  23. Been a while since ive updated this. But work on the golf came to a halt due to funds and other commitments. With summer coming up and money to chuck at the money pit, i aim to get it on road end of June. Yesterday i dropped it off to a mates so he can do all the wiring as i hate wiring More updates on the weekend hopefully
×
×
  • Create New...