Rubadub503 0 Posted February 6, 2019 Report Share Posted February 6, 2019 So I have a '95 VR6 Jetta and for about a month now the cam position sensor has been throwing a code. The car still ran fine the only difference I noticed was that it would take a little longer to start. The other day I got off work and needed a jump whitch was weird cause I left nothing on so there was no reason for it to be dead. I got a jump and it started right up so I took off and got about 500ft and it died. I replaced the sensor and still the engine is trying to turn over but just wont fire up. Is there anything I missed when replacing the cam pos. sensor? Please help! Link to post Share on other sites
Recommended Posts