Jump to content

Not going after capitali


Recommended Posts

Hi all. Sorry for my English, I using translator! In General, the problem is that all changed and the car is not gaining momentum as expected. Have not changed the MAF yet. Car Vento AAA вр6 2.8. The distributor automatic transmission. Dispersed under 82.5. But rides like to repair. I do not understand how to set the TPS. He's on two chips and is not adjustable. Now removed bulocki so little was the course. Put on 1130-1150ом. But still there is a error even after a while. That's how it is. Help who than) thank you20170629_132321.jpg

Link to post
Share on other sites
Hi Aleks,
You mention there is an error after a while - do you mean an error code logged in the ECU?
If so can you list that error code and any information with it?

Yes error 00518 g 69 potentiometer throttle. 16-10-Signal outside tolerance - not always. And it turns out the lambda regulation. Also outside of a tolerance range.
Link to post
Share on other sites

I really don't know!

Is the error in the Transmission Controller, or the Engine Controller? This post on Ross Tech http://forums.ross-tech.com/printthread.php?t=4227&pp=10&page=1 poses a similar problem.

 

One site (http://www.airbagnews.com/PDF/Fehlercodes VAG english.pdf) states:

 

00518 P0121 Throttle Position Sensor - Signal Out of Range (G69) Also check for loose ECM power relay

So, make sure relay 109 is correctly seated in the fuse box.

Other than that, unplug and plug the connections:

# the throttle position sensor, itself

# the round engine harness connector

# engine control unit

Link to post
Share on other sites
I really don't know!
Is the error in the Transmission Controller, or the Engine Controller? This post on Ross Tech http://forums.ross-tech.com/printthread.php?t=4227&pp=10&page=1 poses a similar problem.
 
One site (http://www.airbagnews.com/PDF/Fehlercodes VAG english.pdf) states:

 

00518 P0121 Throttle Position Sensor - Signal Out of Range (G69) Also check for loose ECM power relay

So, make sure relay 109 is correctly seated in the fuse box.
Other than that, unplug and plug the connections:
# the throttle position sensor, itself
# the round engine harness connector
# engine control unit


Yes, the problem is similar to the website you gave but the problem is not solved and there is no one knows. So the question is open.
Link to post
Share on other sites
×
×
  • Create New...