Jump to content

Recommended Posts

What are the symptoms you are experiencing?
What lead you to change the cam Position Sensor?
Do you have an error code from VagCom?

I changed the Sensor because that is what came up on VAG Com I have changed the Spark plugs, Leads and Coil pack and it still sounds like a WRX.
Link to post
Share on other sites
What are the symptoms you are experiencing?
What lead you to change the cam Position Sensor?
Do you have an error code from VagCom?


I have had New Chains New guides but old tensioner, do you think the tensioner given way because I have only done 200 miles since I have done the 2.9 conversion?
Link to post
Share on other sites
The problem is either a knackered new sensor or a wiring fault to the sensor, check that the wires haven't snapped or partially snapped by the connecter were the wires go in. Have you got access to a multi meter.


Initially when changing the Sensor the car ran fine, as well as when I changed the coil pack the car ran fine, both played up after I went up to about 4000rpm. I am at a loss Martin
Link to post
Share on other sites
  • 4 months later...
×
×
  • Create New...