bennyk 1,238 Posted March 12, 2015 Report Share Posted March 12, 2015 As some of you know I've been breaking a charged VR recently and have noticed that it has a bigger set of discs using the standard caliper on a spacer bracket? Anyone have any idea what they are? Or who made them? Had a quick measure whilst still on the car with a tape and they're about 270-280mm? Majid 1 Link to post Share on other sites
redborbet 25 Posted March 12, 2015 Report Share Posted March 12, 2015 Not sure what kit it os but there rare on the ground i think , would you be a good sport and post up the part numbers for the disks and asociated parts Bealieboy and VR6CABBS 2 Link to post Share on other sites
bennyk 1,238 Posted March 12, 2015 Author Report Share Posted March 12, 2015 I'll get them off at the weekend so I can have a look for numbers and proper measure up, I think they were put on there back around 2007, so maybe they're a bit old school now! Bealieboy and D11PS 2 Link to post Share on other sites
matt59876 1 Posted March 25, 2015 Report Share Posted March 25, 2015 Look the same as I have, I think the kit is by ECS, I bought mine off another forum member. I don't think you can buy the discs separately as I looked at the time. bennyk 1 Link to post Share on other sites
bennyk 1,238 Posted March 25, 2015 Author Report Share Posted March 25, 2015 Ok thanks for that, so you can't buy the discs at all then? Thought they might've been borrowed from another car? Link to post Share on other sites
Deckedvr 85 Posted April 6, 2015 Report Share Posted April 6, 2015 Can also be the Epytec 280mm kit, which uses the front discs in the rear.. ive got that setup to, but ive got the kit with the porsche 4 pots for the rear axle and the Cayenne 6 pots on the front , mk3 vrt bennyk 1 Link to post Share on other sites
bennyk 1,238 Posted April 6, 2015 Author Report Share Posted April 6, 2015 Yes got the discs off now, they are 280mm solid discs. Can't decide whether to use them or not now as I have nearly new drilled discs and pads on my car already. Link to post Share on other sites
Recommended Posts