Golf_crazy 2 Posted July 3, 2012 Report Share Posted July 3, 2012 Firstly hi to all and thanks in advance for any assistance. I know I am new to the VR6OC and it holds a massive amount of information. I am after some assistance with installing the Schrick manifold on my car, I have trolled through a number of sites and threads with no clear advice on connecting the schrick in a golf mk2. I ave found a very good guide on the Canadian vr6 forum however this was mainly structured around the corrado. I have got to the point where the manifold is all plugged in and sitting nicely in the bay. The main thing that i am scrathcing my head to figure out is where to plumb in the vacuum pipe feeding the reservoir tank (feeding the actuator). Looking at some other guides they refer to an ABS vacuum line however my golf doesnt have ABS so I cant see clearly where the best point is to t in to the cars vacuum system. I have located a vacuum line on the manifold but this feeds the fuel pressure regulator. Can anyone please advise and maybe post some pictures of the best location. once again thanks in advance for any info. Link to post Share on other sites
Recommended Posts