muttley 0 Posted October 8, 2010 Report Share Posted October 8, 2010 hi does anyone have a photo or a diagram showing where the crank sensor is located on the vr6 obd1 engine please.or even a photo with an arrow pointing to it would be great lolcheersjohn Link to post Share on other sites
UnitedMotorsport 55 Posted October 8, 2010 Report Share Posted October 8, 2010 A quick google search led to this. Red arrow:Sensor in the block: Link to post Share on other sites
Vw_owner 1 Posted March 14, 2011 Report Share Posted March 14, 2011 hi, how would one go about fixing a leak from the sensor above? is it just an o ring? Link to post Share on other sites
Tobester 1 Posted March 15, 2011 Report Share Posted March 15, 2011 Start by replacing the o-ring (about £1.50 from somewhere like TPS) and ensure the join is clean and tight etc. After that, you could also apply some high temp sealing paste for peace of mind. Once done, get the oil back up to temp and then have a good noisy round to see if the leak has stopped. Link to post Share on other sites
Recommended Posts