fuzzwaldo 1 Posted January 22, 2010 Report Share Posted January 22, 2010 hii want to replace my mk3 vr6 gearknob with a mk4 one.my mk3 is a screw fit, does anyone know if mk4's are the samethanks Link to post Share on other sites
Ben Seabrook 4 Posted January 22, 2010 Report Share Posted January 22, 2010 I was told you can do it and I have seen a few mk3's with them so must be possible mate and I have just ordered one for mine Link to post Share on other sites
fuzzwaldo 1 Posted January 22, 2010 Author Report Share Posted January 22, 2010 hican you let me know how you get oncheers Link to post Share on other sites
Ben Seabrook 4 Posted January 22, 2010 Report Share Posted January 22, 2010 yeah no probs mate - will have a go at it on Sunday and let you know Link to post Share on other sites
Ian D 1 Posted January 23, 2010 Report Share Posted January 23, 2010 I have a lupo one, which is I think the same fitment, they dont screw on they just push on and have a metal clip that need tightening to fix them. I tried a tie wrap as tight as I could get it but it was still slightly loose. Also it sits too high, and makes the throw af the gearstick too far. A few people have ended up cutting down the gearstick. I am going to drill out the inside of the gearknob to get it lower.Lupo ones also have an attached gaiter, which is elasticated like the VR one Link to post Share on other sites
Rustyman 0 Posted January 24, 2010 Report Share Posted January 24, 2010 Mark 4 polo ones screw on just like the Mk3 golf This is the one i fitted Link to post Share on other sites
Recommended Posts