Jump to content

How to apply your VR6OC sticker

Recommended Posts

Some people have experienced a few problems when trying to put the membership sticker on their cars so we have put together this handy little guide to help you with the application. :)

1. Make sure the inside of the window is nice and clean and dry.


2. Put the sticker on a hard surface and with a clean cloth rub it thoroughly and hard for about 30 - 60 seconds.



3.Peel back a little bit of the sticker to make sure the wording has been transferred to the application strip.


4.Position your sticker. This is enbtirely up to you but somewhere jaunty and visible is always good :)


5.Again get your clean cloth and rub it thoroughly and applying firm pressure.


6.Slowly peel back the paper and make sure the sticker has taken to the window - if it still on the application strip then put it back on the window and rub it some more.




7.Slowly pull the paper all the way off and stand back to admire your handywork :)


Many thanks to Jim "Lambo Killer" Potter for his rubbing technique and application and to Lisa for the very good bacon sandwiches :)

Link to post
Share on other sites
  • 2 weeks later...
  • 2 months later...
  • 5 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...