Ben Seabrook 4 Posted April 25, 2009 Report Share Posted April 25, 2009 Some people have experienced a few problems when trying to put the membership sticker on their cars so we have put together this handy little guide to help you with the application. 1. Make sure the inside of the window is nice and clean and dry.2. Put the sticker on a hard surface and with a clean cloth rub it thoroughly and hard for about 30 - 60 seconds.3.Peel back a little bit of the sticker to make sure the wording has been transferred to the application strip.4.Position your sticker. This is enbtirely up to you but somewhere jaunty and visible is always good 5.Again get your clean cloth and rub it thoroughly and applying firm pressure.6.Slowly peel back the paper and make sure the sticker has taken to the window - if it still on the application strip then put it back on the window and rub it some more.7.Slowly pull the paper all the way off and stand back to admire your handywork Many thanks to Jim "Lambo Killer" Potter for his rubbing technique and application and to Lisa for the very good bacon sandwiches Link to post Share on other sites
cabrioman 6 Posted April 25, 2009 Report Share Posted April 25, 2009 ah man knew i should have come over just for the bacon sandwhich ..... lol Link to post Share on other sites
craggsy 91 Posted April 25, 2009 Report Share Posted April 25, 2009 Cant you tell you're a rugby type fellow........jaunty!!!!! Link to post Share on other sites
Ben Seabrook 4 Posted April 25, 2009 Author Report Share Posted April 25, 2009 ah man knew i should have come over just for the bacon sandwhich ..... lol it was superb oh and nothing wrong with the word jaunty Craig ;) Link to post Share on other sites
smickers4 0 Posted May 9, 2009 Report Share Posted May 9, 2009 Really wish I had seen this thread before I tried to put my sticker on, think I have wrecked it. :^) How do I get a replacement??? bump Link to post Share on other sites
CALICO 130 Posted May 9, 2009 Report Share Posted May 9, 2009 Ask Jim Potter for price pay by paypal get it in the post Link to post Share on other sites
smickers4 0 Posted May 12, 2009 Report Share Posted May 12, 2009 Really wish I had seen this thread before I tried to put my sticker on' date=' think I have wrecked it. :^) How do I get a replacement??? bump[/quote']bump Link to post Share on other sites
Ben Seabrook 4 Posted May 12, 2009 Author Report Share Posted May 12, 2009 as above mate pm Jim http://www.vr6oc.com/e107_plugins/alternate_profiles/newuser.php?id=3866 and ask him for a replacement Link to post Share on other sites
terrorste 0 Posted July 30, 2009 Report Share Posted July 30, 2009 I've pm'd Jim twice and got no reply anyone else do them? Link to post Share on other sites
VR6Pete 1,456 Posted January 19, 2010 Report Share Posted January 19, 2010 The shop is now online... Link to post Share on other sites
binliner 0 Posted January 19, 2010 Report Share Posted January 19, 2010 If you're not confident about getting it straight I'd position it with a couple of bits of masking tape on the top before peeling the backing off. Once you're happy with it, put a strip of masking tape across the top, flip the sticker up, peel the back off and rub it down Link to post Share on other sites
Recommended Posts