Haydn 0 Posted June 19, 2008 Report Share Posted June 19, 2008 Hello everyone, Im currently rebuilding the VR6 and im wanting to know if there is a manual out there so i can use torque figures, and chain timing and things such as head bolt tightening sequence. What do you all use?ThanksHaydn Link to post Share on other sites
VR6_Absy 0 Posted June 19, 2008 Report Share Posted June 19, 2008 You need to get yourself a Bentley Service Manual, got a red cover Link to post Share on other sites
Charged VR 0 Posted June 19, 2008 Report Share Posted June 19, 2008 Maybe able to help with some VW information if interested but would have to post it to you. if not the bently manual is good but over £50 i think. Link to post Share on other sites
Haydn 0 Posted June 19, 2008 Author Report Share Posted June 19, 2008 Thats great thanks, atm im really after diagrams and text regarding the chains, tensioners and sprockets, and general torque figures including head bolt sequence Link to post Share on other sites
jws vr6 0 Posted June 19, 2008 Report Share Posted June 19, 2008 I got a manual off ebay for about £7 about 6 months ago, Pocket Mechanic i think. Very basic but gives you what you need. Link to post Share on other sites
jws vr6 0 Posted June 19, 2008 Report Share Posted June 19, 2008 Or theres one in the members section if you pay your premium membership. Link to post Share on other sites
Charged VR 0 Posted June 19, 2008 Report Share Posted June 19, 2008 If you PM me your address will send you everything you will need on saturday Link to post Share on other sites
Charged VR 0 Posted June 19, 2008 Report Share Posted June 19, 2008 This is the sort of stuff i can send you, What Year is your VR? Link to post Share on other sites
Haydn 0 Posted June 19, 2008 Author Report Share Posted June 19, 2008 Thanks so much mate, thats great. Its 1995 2.9 obd1. Diagrams like that with torque figures and tightening sequences would spot on. Ill PM you now.Thanks againHaydn Link to post Share on other sites
Haydn 0 Posted June 21, 2008 Author Report Share Posted June 21, 2008 Im also after measurements for standrad bores on a 2.9, and the tolerances if anybodycan help?ThanksHaydn Link to post Share on other sites
xyber 1 Posted June 22, 2008 Report Share Posted June 22, 2008 have a look through this and the diagram at the bottom of the pagehttp://www.vr6oc.com/guides/pdf/gv_aaa_vr6_92-97.pdf Link to post Share on other sites
Haydn 0 Posted June 22, 2008 Author Report Share Posted June 22, 2008 Thats great, cheers Link to post Share on other sites
Recommended Posts