paulrom 1 Posted April 14, 2008 Report Share Posted April 14, 2008 ok like it says above mines buggered and leaking i've bypased it for now but don't want to leave it like it as i am one of these pple that want everthihng to work as i should so my question is anyone done one on a mk3 and any tips b4 i got ripping it apart 8o| also am i right in saying i dont need to remove the dash just the centre console,glove box etc and work my way in from there *-) *-) *-) Link to post Share on other sites
Devildub_06 0 Posted April 15, 2008 Report Share Posted April 15, 2008 Obviously drain your coolant sufficiently ahead of fitting your new unit. You don't have to remove your dash, it should just be a case of centre console and some of the controls (you should be able to make sense of it all with the centre console removed). You don't need to drop the whole dash, though it is a bit tight if memory serves, and don't forgot to refill and bleed up properly when done. Good luck! Link to post Share on other sites
Samson 0 Posted April 15, 2008 Report Share Posted April 15, 2008 yup!! Is a bit of a bitch of a job, especially to get it 'air free'.Glad it is you and not me sorry but good luck... Link to post Share on other sites
Recommended Posts