petervr6 0 Posted November 23, 2006 Report Share Posted November 23, 2006 got a prob with my panel rattling when my music is turned up in the picture below i have shown were it is rattling it only the nearside that does it and found this on ebay do mk3 come with this and were does it go were i need it? http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=330052349634&ssPageName=STRK:MEWA:IT&ih=014 Link to post Share on other sites
SankysVR6 1 Posted November 23, 2006 Report Share Posted November 23, 2006 Not sure about the sound proofing.But liking the pic of the car, what sort of drop are you running on and what with coils or springs. And have you had any arch work done for the wheels.I've got set of TT comps that i'm polishing at the momment, and if i can get the look of my car simillar to yours i would be well happy.Sanky Link to post Share on other sites
gav_113 0 Posted November 23, 2006 Report Share Posted November 23, 2006 think that stuff is for a 3 door m8? Link to post Share on other sites
petervr6 0 Posted November 23, 2006 Author Report Share Posted November 23, 2006 sanky it droped 60mm spax springs ive only had 1 of the archs rolled the drivers side but no rubbing probs 205/40tyres sombody hit the car on the drivers side wheel arch so before i had it repaired i had the arch rolled coz i wouldnt have been able to do it after the repair wanted to get the others done before i had the car resprayed and new wings fitted but.i dont want to risk cracking the paint etc now after folking out a lot of hard earned having it sprayed. thanks for the poss comments. Link to post Share on other sites
SankysVR6 1 Posted November 24, 2006 Report Share Posted November 24, 2006 I guess i'm gone have to see what the car looks like once the wheels are on and take it from there.ThanksSanky Link to post Share on other sites
petervr6 0 Posted November 24, 2006 Author Report Share Posted November 24, 2006 polished comps would look good. Link to post Share on other sites
dubloke 4 Posted December 1, 2006 Report Share Posted December 1, 2006 pete, i used dynamat in my panels, over 400 tokens worth tbf and it still rattles a little, its because the panel isnt reinforced like the other side due to not having the internal bracing for the filler neck etc. its awkward to get in there but does make a difference. by the look of that sounddeadening i'd say its for around the rear light panels on the quarters. there is no way you could get that sort of stuff out in one piece and it wouldnt fit inside the offside panel anyway! Link to post Share on other sites
petervr6 0 Posted December 4, 2006 Author Report Share Posted December 4, 2006 cheers dubloke dynamat itis. Link to post Share on other sites
Recommended Posts