RALA 0 Posted October 1, 2006 Report Share Posted October 1, 2006 Does anyone know how too make the clocks work from the original 16v (90 spec)Thank you. Link to post Share on other sites
VR6Will 0 Posted October 1, 2006 Report Share Posted October 1, 2006 but you have mk3 ones in there fitted already!think you need a speedo cable from an early corrado vr , and then 2 resistors fitted for the rev counter to work properly Link to post Share on other sites
RALA 0 Posted October 1, 2006 Author Report Share Posted October 1, 2006 You ARE a comedy Legend!! Wheres my hoses! Link to post Share on other sites
VR6Will 0 Posted October 2, 2006 Report Share Posted October 2, 2006 good point! should be anytime now, i'll phone up tomorrow and chase them, send me a text to remind me! Link to post Share on other sites
veedubnutz 0 Posted August 9, 2007 Report Share Posted August 9, 2007 You need a speedo cable off a mk2 1.3, and you need to create a new feed off two of the coilpack module pins(with the nuts on them) with two inline 1.3k resistors iirc. Link to post Share on other sites
Haydn 0 Posted January 21, 2009 Report Share Posted January 21, 2009 my mk2 used to take the feed from two of the pins on the coil pack but missfired at 4000rpm and the rev counter went crazy. I'm still trying to figure a way to do it. Link to post Share on other sites
RALA 0 Posted September 9, 2010 Author Report Share Posted September 9, 2010 Bump!! Still not sorted this problem and I am in a new MK2 with the same converstion. Has anybody done this> Link to post Share on other sites
Recommended Posts